Connectivity Card MGM240P mPCIe

Connectivity Card MGM240P mPCIe

Release 1.2

Overview

Remote monitoring of critical infrastructure with edge computing

The MGM240P 5G Suite Connectivity Cards from CTHINGS.CO® are extension cards based on the Silicon Labs® MGM240P SoC. They are multi-protocol chips designed to empower IoT integrators to implement IEEE 802.15.4 connectivity like Bluetooth Low Energy, Bluetooth Mesh, Zigbee®, OpenThread® and other 2.4 GHz protocols. The extension card allows for full-fledged utilisation of the on-board 32-bit ARM® Cortex™-M33 CPU.

The product comes with full CE class-B and RED certification and can be used to quickly and reliably add 2.4 GHz protocol stack support to any existing device with a mini-PCIe slot without worrying about certification or radio performance. A full J-Trace connector is available on a programming jig for convenient firmware development.

CTHINGS.CO also provides support for Silabs Bootloader and EmberZNet Software Stack.

Specifications

Hardware Features

  • Mini PCl-express connector pinout compliant

  • Single-ended U.FL antenna connector

  • Based on Silicon Labs® MGM240P

  • Ultra-low power consumption

  • RF output power up to +20 dBm

  • ARM® Cortex®-M33 32-bit processor

  • Compatible with CTHINGS.CO Programming Jig

Software Features

  • Silabs Bootloader

  • Silabs EmberZNet Software Stack

Electrical Features

  • 3.3 V nominal supply voltage (electrically mini-PCle compliant)

  • 3.0 V - 5.0 V supply voltage range

  • ESD protected

  • Ultra-Low power consumption

RF Specifications

  • +20 dBm TX output power

  • -106.0 dBm 802.15.4 RX sensitivity

  • -106.0 dBm (1% PER) @ 250 kbps O-QPSK DSSS

  • -106.5 dBm (0.1% BER) @ 125 kbps GFSK

  • -102.2 dBm (0.1% BER) @ 500 kbps GFSK

  • -98.5 dBm (0.1% BER) @ 1 Mbps GFSK

  • -95.7 dBm (0.1% BER) @ 2 Mbps GFSK

Embedded Security

  • ARM TrustZone

  • Secure Boot with Root of Trust and Secure Loader (RTSL)

  • Hardware Cryptographic Acceleration Peripheral

Use Cases

  • IoT Gateways

  • Workstations and Laptops

  • Cellular backhaul systems for non-cellular Zigbee meshes

  • Bluetooth interface for IoT sensors

  • Gateways for Silicon Laboratories MGM240P based IoT systems

  • Home Assistant

Certifications

The CTHINGS.CO® MGM240P mPCIe Connectivity Card is CE Class-B, Radio Equipment Directive (RED), & EU RoHS directive compliant. US FCC and UK CA certification is planned. The device has been tested to meet the following electromagnetic compatibility standards:

Certifications

Electromagnetic emissions

  • Conducted emission: EN 55022, EN 55014-1, EN 55011

  • Radiated emission up to 6 GHz

  • Harmonic current emission: EN 61000-3-2

  • Voltage fluctuations and flicker: EN 61000-3-3

Immunity to electromagnetic interference (EMI)

  • Electrostatic discharge (ESD) immunity: EN 61000-4-2

  • Radiated electromagnetic field immunity: EN 61000-4-3

Capabilities

Zigbee Mesh

Plug-and-play support for Zigbee

Bluetooth® 5.3

2.4 GHz transceiver

Certified Radio Equipment

Full CE Class-B & Radio Equipment Directive (RED) certification

Performant CPU

32-bit ARM Cortex-M33 CPU

Mini-PCIe Pinout Compliance

Small and standardised form factor compliant with common hardware

Multiprotocol

Bluetooth Low Energy, Bluetooth Mesh, OpenThread, Zigbee

In-system firmware upgrades

Supported loading firmware via Silabs Bootloader over serial

Out-of-the-box support

Out-of-the-box support for Simplicity SDK and Gecko SDK

Start your digital transformation journey

Order now

https://cthings.co/products/edge-iot-gateways#ordernow